3com AP3750 Uživatelský manuál

Quick Start GuideAP3750 Managed Access Point3CRWX375075A 1The 3Com AP3750 Managed Access Point provides IEEE 802.11a and 802.11b/g wireless access to

107 Attach the access point to the mounting bracket.Junction Box Installation1 Remove the mounting bracket from the access point.CAUTION: If you plan

112 Attach the bracket to the junction box.3 If you are using an external antenna, insert the antenna cable into the antenna connector on the access p

12Solid Wall or Ceiling Installation1 Use the mounting template to cut a hole for the Category 5 cable.2 Remove the mounting bracket from the access p

135 Plug the Category 5 cable into the access point and attach the access point to the mounting bracket.CAUTION: If you plan to use an external anten

14Tabletop Installation1 Remove the mounting bracket from the access point.2 Reverse the bracket and reattach it to the access point.3 Attach the rubb

155 If you are using an external antenna, insert the antenna cable into the antenna connector on the access point.6 Plug the Category 5 cable into the

167 Checking the LED IndicatorsWhen the access point is connected to power, LEDs indicate activity as follows:LEDs Color IndicatesHealth Solid green •

17Regulatory InformationThe 3Com AP3750 Managed Access Point (3CRWX375075A) must be installed and used in strict accordance with the manufacturer&apos

18MANUFACTURER'S FCC DECLARATION OF CONFORMITY3Com Corporation 350 Campus Drive Marlborough, MA 01752-3064, USA (800) 527-8677Date: May 6, 2005De

19EUROPE - EU DECLARATION OF CONFORMITYIntended use: IEEE 802.11a/b/g radio LAN deviceNOTE: To ensure product operation is in compliance with local re

23Com AP3750 Managed Access Point FeaturesKensington Security SlotThe access point has a slot for attachment of a Kensington security cable. The cable

20A copy of the signed Declaration of Conformity can be downloaded from the Product Support web page for the AP3750 (3CRWX375075A) at http://www.3com.

21EUROPE - RESTRICTIONS FOR USE OF 5GHZ FREQUENCIES IN EUROPEAN COMMUNITY COUNTRIES• This device may be not be operated outdoors when using the bands

Copyright © 2006 3Com Corporation. All rights reserved. 3Com and the 3Com logo are registered trademarks of 3Com Corporation. All other company and pr

3RJ-45 Cable PortsThe access point has two RJ-45 ports. Each port provides a 10/100BASE-TX Ethernet connection to a WX switch. The connection can be d

41 Unpacking the Access PointMake sure that you have the following items, which are included with the access point:• Mounting Kit:• One universal moun

53 Connecting External AntennasThe access point has connectors for attaching optional external antennas and antenna cables. The tables below list the

6Cable RequirementThe Ethernet ports on the access point cannot accept a Category 5 cable that has an uneven sheath such as the one shown in the figur

73 Attach the mounting bracket to the T-bar clamp.4 If you are using an external antenna, insert the antenna cable into the antenna connector on the a

8Suspended Ceiling Installation — Drop Ceiling TilesThis procedure applies to T-bars that are 23.9 mm (15/16 inches), 14.2 mm (9/16 inches), or 15.9 m

93 Remove the mounting bracket from the access point.4 Attach the mounting bracket to the T-bar clamp.5 If you are using an external antenna, insert t